0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

KFI Products 100660 Vintsi kinnitus Polaris RZR/RZR-S/RZR-4 jaoks

Brand:KFI Products

3.6/5

€
71.58

Uhiuus KFI multi-kinnituskomplekt järgmise Polaris ATV jaoks: kõik Polarise keskmise suurusega Ranger 400 All Polarise keskmise suurusega Ranger EV 2011-2013 Polarise keskmise suurusega Ranger 500 2011-2013 Polarise keskmise suurusega Ranger 500 Crew 2013 Polarise kesksuuruses Ranger 800this Kit. vints Polaris Rangeri esi- või tagaküljel, kasutades tavalist tagumist 2-tollist vastuvõtjat ja kaasasolevat eesmist 2-tollist vastuvõtjat. See komplekt on mõeldud ülaltoodud masinate uuema kerega. Komplekt sisaldab järgmist: (1) Eesmine ülemine 2-tolline vastuvõtja, mis paigaldatakse pildil näidatud kohta (#100875). (1) 2-tolline vastuvõtja Vintsi kinnitus (#100620) (1) 20-tolline kiirühendus, mis ühendatakse yvintsi juhtmetega (#QC-20) (1) 48-tolline kiirühendus, mis läheb vintsi kontaktorilt yvintsi esiosale Ranger (#QC-48) (1) 120-tolline kiirühendus, mis läheb yvintsi kontaktorilt ythe Rangeri (#QC-120) taha (1) Standardne 5/8-tolline haaketihvt Mõeldud töötama järgmiste vintsidega: (Märkus: selle kinnituse jaoks on vaja rulluisuklambrit, mis on enamiku seal olevate vintsidega kaasas. Kui yvintsikomplektiga ei olnud kaasas kinnitusklambrit, vajate KFI osa nr 100495) KFI: S2000 / A2500 / A3000 / U4500 / U4500w Hoiatus : U2500 / A2000 / A2500 / 1.5ci / 2.5ci / 2.5ce / 2.5s / 3.0ci / 3.0ce / 3.0s Hoiatus : RT15 / RT25 / RT30 / XT15 / XT25 / XT40 / XT40nci / XT40. kasutage Warn Winchiga kaasas olevat fairlead-klambrit) RAMSEY : ATV2500 / ATV3000 SUPERVINTS : Kõik ATV- ja UTV-vintsid MÜRK : Kõik ATV-vintsid MIILIMÄRGIS : Kõik ATV-vintsid CHAMPION : C40252 (4500lbs Vintsid: Kõik) MUUD ATV-VINTSID. ÜLAL (helistage üksikasjade saamiseks)- Standardne ATV-vints, 4-auguline poldi muster 3,00 tolli X 4,875- Standardne UTV-vints 4-auguline poltide muster 3,00 tolli X 6,600- Standardne ATV-vints 2-auguline poldi muster 3,100 Tehnilised andmed: 100 protsenti MADE USA-s Valmistatud 3/16-tollisest terasest Erinevalt kõigist teistest konkurentidest puhastatakse tooted enne pulbervärvimist metallprofiiliga, et tagada parim võimalik viimistlus.

Ühikuid pole saadaval

EAN: 0705105363950

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Komplektid,

100% MADE IN USA.
Brand ‎KFI Products
Customer Reviews 4.5 4.5 out of 5 stars 110 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎100660
Item Weight ‎1.8 pounds
Manufacturer ‎KFI Products
Manufacturer Part Number ‎100660
Model ‎KFI Products 100660
OEM Part Number ‎100660
Product Dimensions ‎8 x 6 x 10 inches

3.6

8 Review
5 Star
75
4 Star
15
3 Star
3
2 Star
0
1 Star
7

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: LL Dude
Perfect fit, very easy to install.
I bought this to install on my 2011 Polaris RZR 800. I used it in conjunction with a Harbor Freight 3500lb winch. This KFI system was a perfect fit. It bolted right on, very little effort. The directions were very easy to follow. It comes with all the hardware necessary for a perfect install. I recommend this for anyone planning on doing a self install of winch on their UTV. It took me a whole 20 - 25 minutes to get it installed.
Scritto da: likalarry
Good winch mount for the RZR 800
The winch mount fit my 2013 Polaris RZR 800 (the basic version) perfectly, tho the Amazon site stated it would NOT fit. The mount is very sturdy, well built and powder coated very nicely. The photo instructions could have been better, but considering how crowded it is in there, the photos do a decent job. The thing to consider when putting a winch on the RZR: With this mount, the winch will be hidden behind the various plastic front end parts, so it will be difficult to see the winch drum while retrieving the cable. This may make it more difficult to guide the cable into neat rows on the drum. For that reason, I suggest giving serious consideration to using a winch with braided nylon cord instead of cable on your RZR. Yes, you can still easily reach the drive selector knob on the end of the winch drum. As far as fit, I had no problem fitting a Warn RT 30 to this mount.
Scritto da: Roland James
This thing outlasted the winch it held.
I bought a cheaper winch off of Ebay, and as expected the universal mounting plate included, did not work on my RZR 800. So I purchased this. I had to drill a bit to get this to work right, as the holes did not line up like they should have, but once installed, it was solid. I have had this on my machine for several months now, and it has not moved. I destroyed the wince itself, but this thing will hold a new one soon enough. Certainly worth the price, and five stars if it was drilled out right from the start, but alas it was not, and for the headaches it caused during the install, I remove a star.
Scritto da: jason feil
Fits 09 RZR 800S
This fit my 09 RZR 800s perfectly. I have had other cheaper mounts that did not fit with out modifications. It is pretty easy to install, but as others have said there is not much room to mount the winch to the brackets, which is no fault of the manufacturer. I would but again if needed.
Scritto da: DeAnna C.
Works and fits well
Fit very good the nut that is hooked onto the angle bars made install easy. Only complaint is the angle bars could be a little heavier but I think they will work fine Thanks
Scritto da: Amazon Customer
Good product.
Seems to be a good product. A little hard to install the front bolts for the fair lead but that's just because there isn't much room to work. I used it with a Harbor Freight winch. I have had good luck with every KFI product I have used.
Scritto da: Starman
A very well made and sturdy mount
It took a small amount of time to understand how to put this together (pictures provided in instructions were not all that clear) but in the end I got it done. Otherwise this is a great winch mount. The instructions had me remove a few bolts that did absolutely nothing to aid installation but it didn't hurt anything either. I have yet to put it to use but it does look like a very well made and sturdy mount.
Scritto da: Donald Wolfgang
Great for my RZR 800. But watch your roller fairlead
I bought this for my 2009 RZR 800 and it fit great. Just a heads up the stock fairlead I got with my winch was to small and I need to order another fairlead so just keep that in mind when ordering. Was not a big deal.

Seotud tooted

hot
KFI Products 100860 XUV vintsi kinnitus John Deere Gator 625I/825I/855D jaoks
3.6/5

€ 142.97

KFI Products 100860 XUV vintsi kinnitus John Deere Gator 625I/825I/855D jaoks
3.6/5

€ 142.97

hot
Borne Off-Road 2-tolline haakeseadisega vastuvõtja seeklikinnitus, sinine
0.1/5

€ 123.90

Borne Off-Road 2-tolline haakeseadisega vastuvõtja seeklikinnitus, sinine
0.1/5

€ 123.90

hot
Bulldog vints 10039 järelhaagise vints (12000 naelane haagis 90 Ft. traattrossiga, rullnööriga, paigaldusplaat, madal profiil), 1 pakk
3.5/5

€ 1800.19

Bulldog vints 10039 järelhaagise vints (12000 naelane haagis 90 Ft. traattrossiga, rullnööriga, paigaldusplaat, madal profiil), 1 pakk
3.5/5

€ 1800.19

hot
KFI SE45W-R2 Stealth-seeria vints (4500 naela)
3.4/5

€ 953.38

KFI SE45W-R2 Stealth-seeria vints (4500 naela)
3.4/5

€ 953.38

hot
Ranch Hand WPC115BL1 vintsiplaat
0.1/5

€ 395.13

Ranch Hand WPC115BL1 vintsiplaat
0.1/5

€ 395.13

hot
VEVORi tööstuslik hüdrauliline vints 10 000 naela, hüdrauliline ankurvints 24 m tugeva teraskaabliga, hüdraulilise ajamiga vintsi adapteri komplekt, mehaanilise lukuga utiliidivints Tacoma Yukon Hummeri jaoks jne.
1.9/5

€ 1118.02

VEVORi tööstuslik hüdrauliline vints 10 000 naela, hüdrauliline ankurvints 24 m tugeva teraskaabliga, hüdraulilise ajamiga vintsi adapteri komplekt, mehaanilise lukuga utiliidivints Tacoma Yukon Hummeri jaoks jne.
1.9/5

€ 1118.02

hot
Extreme Max 5600.3122 ATV vintsi kinnitus Polaris RZR 900, 1000, Turbo jaoks
3/5

€ 93.27

Extreme Max 5600.3122 ATV vintsi kinnitus Polaris RZR 900, 1000, Turbo jaoks
3/5

€ 93.27

hot
Supervints 1120210 LT2000 12V DC elektriline vints 2000 naela/907kg üherealine tõmberulliga Fairlead, 5/16 tolli. x 50 jalga. Terastross, juhtmega käeshoitav kaugjuhtimispult, juhtrauda klahvlüliti
3.5/5

€ 220.74

Supervints 1120210 LT2000 12V DC elektriline vints 2000 naela/907kg üherealine tõmberulliga Fairlead, 5/16 tolli. x 50 jalga. Terastross, juhtmega käeshoitav kaugjuhtimispult, juhtrauda klahvlüliti
3.5/5

€ 220.74

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu