Johnson Level & Tool RAS-120 alumiiniumist sarikate ruut käsitsi, 12, hõbe, 1 ruut

Brand:Johnson

3.7/5

47.50

TOOTE KIRJELDUS Saejuhi, trepi paigutustööriista või sarikate tööriistana aitab johnsoni 12 Rafter square teil tööd täpselt ja lihtsalt teha. Selle tugeva alumiiniumist korpuse konstruktsioon koos CNC-töödeldud servadega tagab suurema täpsuse ja vastupidavuse, samas kui vähese pimestava ja kaitsva pulbervärviga viimistlus muudab püsivad skaalad ja numbrid hõlpsasti loetavaks. Sellel ruudul on ka 1-3/4-ga algavad kirjutussälgud, mis on kasulikud pöördepunktist väliste sammude ülekandmisel, ja käepärased markerid, mis mõõdavad 2x4 tahvlit Mõõtmed 1-1/2, 3 ja 3-1/2. TOOTJALT See 12 sarikate ruut on mitmekülgne tööriist ehitajatele ja töövõtjatele. Selle paks serv on kasulik saejuhina – seda saab kasutada otse saega vastu ruutu ristlõike või nurga all olevate lõigete tegemiseks, kasutades söövitatud nurgamõõturi skaalat. Seda saab kasutada ka kaudselt, kasutades sälkusid, et luua saelõikejoon rebimiseks. Sarikaruut lihtsustab ka treppide paigutust – selle integreeritud kaugus- ja nurgaskaalad võimaldavad teil kiiresti ja täpselt oma lõikejooni oma nööridele märkida. Ja loomulikult on sellel sarikate väljakul kaalud puusa-, oru- ja tungraua sarikate lõikamiseks.

EAN: 100076972437

Kategooriad Tööriistad ja kodukaubad,

LIHTSUSTAB TREPI PAIGUTUS: see 12 kolmnurgaga ruudukujuline integreeritud kauguse ja nurga skaala võimaldab teil kiiresti ja täpselt joonistada lõikejooni nööridele. See sarikate ruut sisaldab puusa lõikamiseks mõeldud kaalusid; org; ja tungraua sarikad. KASUTUSVALIK: Selle nurga ruudu paks serv sobib suurepäraselt saejuhiks ristlõigete või nurklõigete jaoks, kasutades graveeritud nurgamõõturi skaalat. Seda saab kasutada ka kaudselt; kriipsutades sisse sälgud, et moodustada saelõikejoon rebimislõigete jaoks. TÄPSED MÕÕTMISED: sellel ruudukujulise paigutuse tööriistal on 1–3/4 algavad joonestussälgud, mis sobivad suurepäraselt pöördepunktist välimiste sammude ülekandmiseks; samuti mugavad märgised, mis mõõdavad 2×4 tahvli mõõtmeid 1-1/2; 3; ja 3-1/2. PULBERVÄLJASTATUD VIIMISTLUS: sellel ruudukujulisel sarikal ja kraadiklaasil on püsivalt söövitatud jaotused ja numbrid, mis on vähese pimestamise tõttu kergesti loetavad; kaitsev pulbervärvitud viimistlus. RAFTER ANGLE RUUT: Johnson Rafter Tool teeb tööd lihtsalt ja täpselt tänu tugevale alumiiniumkorpusele, millel on CNC-töödeldud servad. See mitmekülgne tööriist sobib suurepäraselt professionaalsetele ehitajatele ja töövõtjatele.
Batteries Required? ‎No
Brand Johnson
Color Silver
Color ‎Silver
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 419 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Graduation Range 1/4 Inches
Included Components ‎Test & Measurement
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎RAS120
Item Package Quantity ‎1
Item Weight ‎13.3 ounces
Manufacturer ‎Johnson Level & Tool
Material Aluminum
Material ‎Aluminum
Measurement Accuracy ‎....
Measurement System ‎Metric
National Stock Number ‎5210-01-365-0056
Number Of Pieces ‎1
Part Number ‎RAS120
Product Dimensions ‎0.8 x 10.2 x 7.5 inches
Size ‎12" Rafter Square
Style Rafter Square
Style ‎Rafter Square
Thickness ‎1 Inches
Warranty Description ‎Limited Lifetime Warranty: Johnson level warrants this product against defects in material and workmanship of mechanical parts for life and electronics for one year. The company will replace or repair the product if it fails under normal use. This warranty is limited to the repair or replacement of the product only.

3.7

13 Review
5 Star
82
4 Star
12
3 Star
2
2 Star
1
1 Star
2

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Robert Dees
Toughness
Made strong
Scritto da: Jon Roberts
High Quality Carpenters/Roofers Square
Really nice heavy duty carpenters square at an unbelievable price! Great value for the money. Markings on the square are cut into the metal which will ensure they will remain readable and can't be worn or scrapped off. About the only improvement I would make would be to color in the markings (which I have began doing) but they are still easily readable without that being done. Would definitely buy again and probably will as presents for friends that could use a square larger than the usual 7" size.
Scritto da: Melinda Taylor
Nice tool
Nice addition to the tool box
Scritto da: troy bigley
Great tool
Very nicely made. Quality tool
Scritto da: Michael J
Accurate, tough, and USA-made
This USA-made square is useful, accurate, and an excellent value. It’s accurate, as tested by my 6” machinist’s square, solid, and cheaper than a lot of plastic imports. Highly recommended.
Scritto da: Eileen1963
Great for installing LVP
It was my first time installing LVP and this tool was indispencable. It's large enought to span an 8 inch plank but is not bulky or heavy. Glad I purchased it. Hightly recommend.
Scritto da: unlisted
Better than plastic in almost all ways
I've had the bright orange plastic version of this for a few years and I wouldn't be without it on a project. The plastic, however, is far more brittle than I realized, and both of my smaller ones and the large orange one have broken in a few places, hence this purchase. It is sturdy and well layed out, but I must admit that I find it harder to read. I don't know if it's the color, the finish, or the depth and sharpness of the figures carved into it, but expecially in low light conditions, it's no joy to read. That said, it is sturdy, it is well layed out, and It will be seeing plenty of use.
Scritto da: Rich
Great square
The book that came with it is a gold mine of valuable information
Scritto da: Ken Pemberton
Quality kit. Well worth the price.
As a budding woodworker, checking, getting and keeping things square is a constant task. This is the big-boy version, which lives on or near my work-bench. It's little seven-inch brother hangs out in my tool pouch or pokes out of my back jeans pocket. It's great to have both. This one is particularly handy for quick cross-cuts with the circular saw, as it's chunky enough to provide a mini fence for the saw to ride against. The scribing notches are far more useful than I'd imagined - running a dead-straight line down and eight-foot board, exactly three inches from the end, for example, is a doddle! And the protractor function is good for quick angle-checks, although I'd use something with better resolution to set up fine angled cuts. Not forgetting the primary 45-degree and 90-degree angles built into this thing, which as far as I can determine are absolutely spot on. You pay for quality and precision. I wasted some cash on a cheap imitation first, and ended up binning it. I've often regretted buying cheap tools. But I've never yet regretted investing in quality kit.
Scritto da: James
Great tool to have!
Brilliant solid quality, great tool to have. Using almost every day on site since purchase and couldn’t be with out it now. Ordered to be delivered in the UK, and arrived with no hassle!
Scritto da: Jane
As described
As described
Scritto da: ObO
Great tool and accurate
I like this because it is accurate and as such fit for purpose
Scritto da: Ole W.
I'm very happy with it
I'm very happy with it!!! In the future I hope they make a metric one(since I love in Norway and use the metric system????)

Seotud tooted

hot
HexArmor
3.4/5

€ 98.32

HexArmor
3.4/5

€ 98.32

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array