Danco 86712 Moen kassetitõmbaja, pakk 1, hõbedane

Brand:Danco

3.5/5

45.19

TOOTE KIRJELDUS Danco on üks suurimaid sanitaartehniliste remondi-, vahetus- ja ümberehituste tarnijaid koduarendustööstuses, kes keskendub peamiselt selleks, et anda isetehtavatele tarbijatele sanitaartehnilised lahendused, mis on nii praktilised kui ka taskukohased, andes teie kodule parema mugavuse. värske veetlus ja uuenenud elegants. Pakume stiilseid disainile orienteeritud uuenduslikke kodulahendusi, mis on kasutajasõbralikud, et toetada ja julgustada kliente koduparandustöödega iseseisvalt tegelema – ilma professionaalsete teenuste kõrge hinnasildita. Eemaldage vana segistikassett Danco kassetitõmbajaga Moeni jaoks. See tööriist ühildub mudelitega Moen 1222, 1225 ja 80933. See tööriist töötab plastikust ja messingist kassettidega. Uue kasseti paigaldamine välistab lekkiva segisti ja säästab nii vett kui energiat. Danco kassetitõmbur aitab muuta teie isetegemise paigaldamise kraanikaussi, vanni või vannisegistisse lihtsamaks. Hankige oma juba täna! TOOTJALT Danco on üks suurimaid sanitaartehniliste remondi-, vahetus- ja ümberehitustööde tarnijaid koduarendustööstuses. Oleme suures osas keskendunud Do It Yourself tarbijatele soodsa hinnaga sanitaartehniliste toodete ja lahendustega, mis loovad vannituppa ja kööki uusi ja värskendavaid sisekujundusi.

KESTAVAKS EHITATUD: Vastupidav alumiiniumkonstruktsioon tagab tugevuse ja töökindluse. VANNI-/DUŠISEGISTID: Kassettide eemaldamise tööriist eemaldab vanad kulunud padrunid Moeni vanni- ja dušisegistitelt. KASSETTI ÜHILDUVUS: Segisti kasseti tõmmits on ette nähtud nii messingist kui ka plastikust kassettide paigaldamiseks ja eemaldamiseks. FUNKTSIONAALNE: eemaldab külmunud padrunid ja eemaldab hülsid AINULT MOEN-i segistitelt. MOEN-ÜHIBLIKUD: Asendage oma vana Moen Posi-Temp vanni/dušikassett Danco mudeliga 88431E (asendab OEM#1225), mudeliga 80993TS (asendab OEM#1200), mudeliga 88675A (asendab OEM#1222). KASSETTI EEMALDAMISE TÖÖRIISTA: eemaldab Moen vanni/dušši Posi-Temp rõhuga tasakaalustatud dušipadrunid 1200, 1222 ja 1225 seeriad.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Silver
Customer Reviews 4.5 4.5 out of 5 stars 3,801 ratings 4.5 out of 5 stars
Finish ‎Steel
Included Components ‎Cartridge Puller
Is Discontinued By Manufacturer ‎No
Item model number ‎86712
Item Package Quantity ‎1
Item Weight ‎4.6 ounces
Manufacturer ‎Danco, Inc.
Material ‎Aluminum
Measurement System ‎Metric
Part Number ‎86712
Product Dimensions ‎1.4 x 5.1 x 7.1 inches
Size ‎Pack of 1
Style ‎Puller
Warranty Description ‎Limited 1 Year

3.5

13 Review
5 Star
72
4 Star
14
3 Star
7
2 Star
3
1 Star
4

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Michael L.
Worked like it's supposed to.
Puller worked like it was made to, pulled it out to the limit of the pressure nut, pulled some by hand, but the old cartridge was half way out and still stuck. Took the puller off, got a 1 inch piece of 1 inch sch 40 pvc ( or get a 3/4 in pvc coupler and cut off what you don't need, both are 1 in inside diameter) and put it on the cartridge to extend the reach of the nut. Put the puller back on, turned the nut a few more times, and got the mangled mess of rubber all the way out. Disregard the youtube videos that say pull it out with channel lock pliers, unless you're feeling lucky and the cartridge you're pulling out hasn't been in there very long.
Scritto da: Robert J. Keltos
Worked great for removing old cartridge.
This is a must to remove the old cartridge without too much difficulty. Take your time and it does the job.
Scritto da: Robert K
worked pretty ok for me.
worked pretty ok for me, but it would be better if the pressure bolt were large to help remove the valve further.
Scritto da: Amazon Customer
perfect
just what I needed. Did the job.
Scritto da: Amazon Customer
prevented the stuck valve that was shown on you tube
arrived on time and as described, will keep for any future repairs sine all faucets in my house are moen first repair in thirty years
Scritto da: Steeler50
Works well and much cheaper than a Mown one. Save some money with tis one.
All good and works well.
Scritto da: Bez
Works like a charm
Did 3 cartridge pulls without a problem. Very easy to use and durable. I recommend for those stubborn cartridge replacements.
Scritto da: GEORGE FOLDI
Ease of use
This Moen Cartridge Puller worked GREAT. I tried using the instructions that Moan gave with the new cartridge and their way I would need three men and a boy pulling to get the cartridge out. Using this puller made it so much easier. Connect the puller to the old cartridge and then using a crescent wrench I just slowly kept turning the wrench on the puller and in about four turns the old cartridge started to move out of the housing. So relieved once it was removed. After that putting the new one in was a breeze. Would recommend this for anyone having to remove an old cartridge. To bad they don't make a universal puller for other cartridges.
Scritto da: Xenos
Good tool for its purpose
My 22+ years Moen bath/shower faucet had begun dripping at the handle whenever I turned the water on and for years had been stiff so I finally decided to fix it by replacing the cartridge with a new one. I initially tried to pull the old cartridge out using just a pair of pliers but I was unable to do so. I checked online for advice and saw a number of references to a Moen brand cartridge puller tool but it was listed at over CAN$40. The cartridge itself was listed at CAN$36 at one of the big DIY stores. Reluctant to pay 40 bucks for a tool that I would probably never use more than once, I looked for a cheaper alternative and I found it in the Amazon listing for this tool. Yes, the tool is made of aluminum rather than steel and some of the plating came off after using it but it worked like a charm and I was able to replace the cartridge with the new one very easily. Oh and the new cartridge it turns out didn't cost me anything because the faucet came with a lifetime warranty. So for the 20 bucks I paid for this tool, I was able to bring back my old faucet to a brand new condition and it now works smoothly without any dripping. Overall this is a good tool for its purpose.
Scritto da: Amazon Customer
Four Stars
Nice tool Thanks
Scritto da: Brett
Works good and worth the money
Very light material compared to my other puller.. but it worked well. I broke my other cartridge pulling it out with my other cartridge puller that was meant for a different cartridge so I wanted to get this one that was meant for my cartridge so I didn't break it and spend hours trying to drill out my cartridge being careful to not hit any pipe. I got the cartridge half out and broke it again with this one but that was my own fault because I started to put pressure from side to side instead of pulling straight out. . But having it half out only took a couple mins to destroy and pull out the old cartridge. So I would say this is worth buying just don't push side to side.
Scritto da: wilma elliott
An excellent tool that's simple to use
What a slick invention! The cartridge came out easily.
Scritto da: jrb_sland
Well made, will be worth the money with a very stuck cartridge
Several YouTube videos about replacing Moen cartridges use this {or similar} tool to make cartridge removal more effortless. Turns out I didn't actually need it this time around, but I have other Moen faucets in my house, and the tool sits quietly at the bottom of a bathroom cabinet drawer...

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array