Curt Manufacturing 55571, sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Nissan Murano jaoks, must

Name: Curt Manufacturing 55571, sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Nissan Murano jaoks, must
Brand: Curt Manufacturing
SKU: 0612314555710
Price: 131.24 EUR
Availability: InStock

Brand:Curt Manufacturing

3.7/5

€
131.24

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, mis sobib teatud aastate Nissan Murano mudelile (sõiduki ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314555710

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Nissan Murano valitud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	‎Curt Manufacturing
Country of Origin	‎Mexico
Customer Reviews	4.6 4.6 out of 5 stars 181 ratings 4.6 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item model number	‎55571
Item Weight	‎12.8 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎55571
Model	‎Custom Wiring
OEM Part Number	‎55571
Product Dimensions	‎9 x 4 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Art in VT

Hooked up with no problems

Relatively easy install given the number of clips/nuts and panels that need to be removed to gain access to the wiring harness that it plugs into on each side. I didn't pay close enough attention to the details to note that it is a 4 pin connector, so does not have a connection for reverse lights (which I have on the back of my trailers hitch mounted rack). I'm hoping I can find the line to the backup lights for the needed fifth pin connection since the lights themselves are both mounted in the hatch lid. Once I find that I'll tag into it for a relay signal to turn on the trailer mounted lights with power directly from a fused line to the battery.

Scritto da: Maria

Very easy to install

It’s just as it stated , it was very easy to install

Scritto da: Amazon Customer

Perfect fit

Figment spot on

Scritto da: Wackadoo

Easy Install and Works Great!

When I first bought my 2011 Nissan Murano, I knew immediately that I needed a hitch, and really wanted a wiring harness with it as well so I could tow our pop-up camper for short/nearby camping trips. Problem was, Nissan wanted almost $600 to install a "factory" hitch and wiring harness. So, I immediately bought a "hidden hitch" for $115 and installed it with ease, but did not add the harness until recently because I didn't want to have to run a wire under the car from the back to the battery. The Curt T-Connector solves the wire-to-the-battery problem and installs with ease. I'm not exactly Johnny Fix It, so I just took my time, watched a youtube vid on how to do the install and followed along with the supplied instructions. Installation took about 1.5 hours total (again, I took my time because I didn't want to break a clip or scratch the interior or exterior of the car). Mission accomplished - everything went perfectly. I hooked up our pop-up camper today and brought it home - all lights worked perfectly, and the 10 amp fuse had no problems at all. So, for around $175, I was able to install a system that's "almost" as good as the factory version. I say "almost" because the factory wiring harness is attached to the hitch, but the Curt rests inside your spare tire compartment and hangs out the back of the car when being used. That's the only knock I have on the product, but it's something I can live with since I won't be using it all of the time. Great product, easy install, works as advertised, and saves a ton of money vs. a factory install. Highly recommend.

Scritto da: Lauren

Could not have been easier to install!

Anyone can install this wire set! Super fast delivery, high quality!

Scritto da: Steve R

As expected

Instillation instructions were a little vague and hard to understand. However, the install is very simply plug and play. No wire splicing easy install.

Scritto da: Midweste

Highly recommend this t-Connector - Exact fit and integration with OEM wiring!!

Ordered this T-Connector harness for my 03 Nissan Murano and it worked perfectly. The excellent instructions guided me through each step of the installation and were dead on accurate for my vehicle. This unit has the exact OEM Nissan connectors that snap in place tight and secure. Install time was around 20 minutes... There is also a step by step installation guide video on the Tube for those that need more visual instruction. Plugged in my trailer lights and all is good! The matching CURT 13571 Class III Receiver from Amazon is arriving tomorrow... Dealer wanted north of $500 for the parts and installation / Amazon price for both parts $175 with free 2-day Prime shipping!! NOTE: The T-Connector that is pictured shows rubber tubing with a grommet installed on the trailer wiring. This is not on the revised and updated unit I received. It is kind of overkill since the 4 prong plug is protected at the connection and comes with a weather boot. Very satisfied with my purchase

Scritto da: Ben

Easy to install

I agree with another user that it doesn't arrive as pictured. There is no grommet and tubing. However, per the instructions the connecter is supposed to be run under the tailgate or hatch when in use. That being said you don't these parts if you use it according to manufactures guidelines. I have a 2012 Nissan Murano and the installation was a breeze. It took about 15 mins for me to install and was extremely easy. The only thing that bothered me and reason for getting 4 stars in that it came with the wrong fuse. They supply a 10amp mini fuse and the vehicle uses a low profile. I went to the local parts store and purchased the correct fuse. Not a huge deal but it would have been nice to have the correct part.

Scritto da: C. Hildebrandt

Easy plug and play

I am happy with the product in general, nice that its a direct clip in unit. The instructions were good but I had to remove extra panels and do alot of "work by feel" due to no vision and short factory harness wires. Once installed and wires cleaned up everything went back together as it should and lights worked. There are full how to install video's available on Google with a quick search.

Scritto da: Amazon Customer

Very happy about the no cutting/splicing of wires

Very happy about the no cutting/splicing of wires. Everything connected very well. Would buy another kit from Curt. Took about 1.5 hrs start to finish with a few beverages in between.

Scritto da: Daniel Beattie

So easy to install

I loved how easy this was to install,,,Didn't like the price,,,but hey,,,in the long run,,,it was worth it

Scritto da: Will

Highly recommend this product

Product as described with quick and easy install.

Scritto da: Jerry Mugridge

Simple install

Vehicle specific light adapter, fit & works perfect. Instructions good but also U-Tube videos make install easy.