CURT 56377 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, valik Mazda CX-5, must

Name: CURT 56377 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, valik Mazda CX-5, must
Brand: CURT
SKU: 0612314563777
Price: 106.84 EUR
Availability: InStock

Brand:CURT

3.6/5

€
106.84

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, et see sobiks teatud aastate Mazda CX5 mudeliga (sõidukiga ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314563777

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Mazda CX 5 valitud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 224 ratings 4.6 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item model number	‎56377
Item Weight	1.63 Pounds
Item Weight	‎1.63 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56377
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56377

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Justin E

Low quality

The connector was crushed when I got it. This was the second time I've installed a curt trailer wiring harness for two different cars. Quality of materials seems lower than my first harness. Easy to install but a hassle without a lift for the cx5 because of all the paneling.

Scritto da: cheesis

wired, baby!

This is a decent kit with an isolator to keep vehicle's electrical system unaffected by wiring problems that originate with your trailer. The two sided tape affixed to the back of the isolator/ control unit was as dry and useless as tits on a mule, so you'll have most likely to figure another way to secure it to one of your interior panels. Also take note that when you secure your two thick wires together that one is 14 ga. and the other 12, and the butt connector provided, being a 10/12 might have to get a little extra crimping on the 14 side. Made in China

Scritto da: Al A.

Well made and my Mazda Dealership installed it and complimented me on this harness!

I had my Mazda dealer handle installation of this and a Curt 2" receiver on a new 2021 CX-5 Signature I just purchased. I'm familiar with Curt products as I've owned them before and every one was well made. The tech who installed this said it was a great choice and he said the installation went very easy and logically as well. The Tech and I discussed any shortcuts to the install and he emphasized not to take a shortcut and splice to the hot wire to the rear 12V cigarette receptacle as does Curt NOT want you to do this per the installation instructions. The hot wire should go to the battery location under the hood. My Utility Trailer uses all regular bulbs rather than low power LEDs and the Tech said it is safer and more reliable to hot wire to the battery due to the higher demand on that circuit branch. Given I might use that rear cirgarette lighter location for other accessories, that all makes sense. Maybe I'll convert my trailer to all LEDs at some point. Both the Service Advisor and the Tech warned me not to take any shortcuts and they wanted to adhere to Curt's Installation instructions for this harness, including the black hot wire that has to run to the front of the vehicle. It was, -By the Book, period!- There is plenty length for the harness connection and everything is stored in the rear wheel-well where the spare tire is located. No complaints and when a Mazda tech says a product is great and the install of it was the same, that's good enough for me! 5 Stars all around and no complaints at all.

Scritto da: Steve Gordon

Fits well all aspects , good product thanks

Mazda Installation difficult ! Harness great quality, needs wiring 12 in longer for trailer connect

Scritto da: aussiemama

Doubleback tape

The doubleback tape was useless, had no adhesion, past shelf life. Kit install pretty straight forward.

Scritto da: B. T.

Install by watching the video. There's one tricky part.

This adapter is well made and overall pretty easy to install. Of course running the power wire from the battery is a pain, but it can be done without a lift. I was able to squeeze under the car and zip tie the power wire to the existing support and then put the plate that protects that area back on. I used the Uhaul video and it walks you through the entire install in great detail. They use an upgraded battery cable but it's pretty self explanatory how to use the one that comes in this kit. I was able to install this in about an hour. I leave it inside the car under the trunk mat and just run it out and hook it up and then close the trunk over the wires when in use. You can also mount it outside the car, but then you'll need to worry about keeping the connection clean. As little as we use it I'd rather keep it out of the elements until needed. The trunk does not damage the wires when closed.

Scritto da: Amazon Customer

Easy to install for a total newbie with no special tools!

It took me a day (I have an infant so everything takes me much longer than it should) but it works and I figured all of it out myself!

Scritto da: Michael Maxwell

Easy install

Easy install, but I tapped positive into the power lead for the accessory socket in my cargo area. More than enough amps on that fuse in my car to handle the lights, and I installed the inline fuse as a backup. Didn't feel like running a power lead under the car and didn't need to. Works perfectly. Extra length sits in my spare tire area and I just close the hatch over the wire when not using it. I only use it a few times a year anyway so no sense running it through the floor.

Scritto da: Dohn

Very easy to install

Good product instructions

Scritto da: Barry C.

Works great on Mazda CX-5

Had it installed professionally, works as expected.

Scritto da: Amazon Customer

Easy to install works well

Works as advertised easy to install

Scritto da: Luma46

Works well on 2021 Mazda CX5

Good product, fits the vehicle, but not so easy to install. You have to partially remove some cover panels from trunk and run a + wire from battery, under the vehicle into the trunk.

Scritto da: Sanchit Datyal

Worked on mazda cx5 2019

Highly recommend it and took 2 hrs for installation