CURT 56365 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Honda Pilot, Ridgeline

Name: CURT 56365 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Honda Pilot, Ridgeline
Brand: CURT
SKU: 0612314563654
Price: 104.57 EUR
Availability: InStock

Brand:CURT

3.3/5

€
104.57

CURTi kohandatud juhtmestiku pistikud on lihtsaim viis oma sõiduki varustamiseks CURT-i haagise juhtmestikuga. Need on ehitatud tööstuse kõige arenenuma tehnoloogiaga ning igaüks neist on kohandatud töötama konkreetse margi ja mudeliga. Mõned autotootjad paigaldavad sõidukile spetsiaalse pistikupesa, mida kasutatakse sõiduki ja haagise juhtmestiku ühendamiseks. Kuigi see spetsiaalne pistikupesa ei ole igal sõidukil varustatud, kasutab CURT kohandatud juhtmekonnektor – mida nimetatakse ka T-pistikuks – pistikupesa lihtsaks ja pingevabaks paigaldamiseks. Selle asemel, et nõuda sõiduki juhtmestiku lõikamist, liitmist ja jootmist, kasutab kohandatud juhtmekonnektor üht originaalseadmete tootjaga ühilduvat pistikut ja tagab kohe standardse universaalse sõiduki ja haagise juhtmestiku, tavaliselt neljasuunalise ühendusena. tasane. Kõik CURTi kohandatud juhtmestiku pistikud on tehtud sõidukispetsiifilisteks, et tagada võimalikult lihtne paigaldus ja parim sobivus. See konkreetne pistikpistik pakub 4-suunalist lamedat pistikupesa ja on mõeldud Honda Piloti ja Ridgeline'i teatud aastate jaoks kohandatud juhtmestikuks (vajalik on tehase pukseerimispakett; sõiduki ühilduvuse kontrollimiseks vaadake rakenduse teavet). See on varustatud kogu vajaliku riistvaraga kindla ühenduse loomiseks. Kaasas on ka tolmukate, mis hoiab pistikupesa puhtana, kui seda ei kasutata. Pikaajalise töökindluse tagamiseks testitakse kõiki CURTi kohandatud juhtmeühendusi optimaalse funktsionaalsuse tagamiseks põhjalikult. Stress on viimane asi, mida peaksite haagise vedamisel tundma – olenemata sellest, kas vedate oma haagissuvilat sellesse lemmiklaagrisse, ATV-d jahimaadele või kalalaeva uude peidetud leviala. CURTis arvame, et teie pukseerimisvarustus peaks teie kogemust nautima, mitte seda vähendama.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314563654

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Honda Piloti ja Ridgeline'i valitud aastate jaoks (vajalik on tehase pukseerimispakett). STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. Neljasuunaline haagise tulede juhtmestik on populaarne paljude erinevate haagiste puhul, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 87 ratings 4.2 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56365
Item Weight	0.84 Pounds
Item Weight	‎13.4 ounces
Manufacturer	‎CURT
Manufacturer Part Number	‎56365
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56365
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: D

need update for Ridgeline missing fuses and directions incomplete

While the it appears to be a good value and is not that bad to install. Directions need to be updated for Ridgeline 1. Picture of where to plug the Custom harness into behind the rear seat. You have to reach way up there and just feel for it to pull it down to expose it. 2. While I have the breaks/turn/hazard lights working the tail/running lights will not come on. It also appears that not all fuses needed are included . It’s looking like I will need to get 2 more 20A fuses to fill out the entire fuse box. Picture of the fuse box has all fuses installed but the kit does not include all the fuses required. Picture shows a yellow 20A fuse in position 3 but directions say to use a 10A Also picture from mfg website on directions shows all fuses installed. Yellow = 20A Red = 10A Brown = 7.5A I have a 2019 Ridgline RTL 2 Wheel drive (FWD). See the included pictures of fuse boxes One from Website of mfg and one from my 2019 Ridgeline Now I am going to get some more fuses and see if that fixes it to make it look just like the picture of the installation manual. From mfg website. Which is in color Includes Printed directions are in black and white I found this on a forum, looks like there is a wire harness problem from honda perhaps where Running lights will not come on . ----------- My 2017 Ridgeline Touring AWD has the the 7 pin trailer plug. Without the vehicle running and no park or headlights on, there is dc power on one terminal only of the truck connector. When the vehicle is running, my utility trailer (factory made) lighting works fine except for park lights. Re, the trailer.... brake lights, turn signals all work fine in conjunction with what the Vehicle is doing except: the park lights as well as license plate light do not energize when the vehicle's park or head lights are on. What I have done temporarily (until I figure it out) is connect that one dc supply on the factory installed 7 pin trailer connector, to the side marker lights and license plate to make them work. Ergo, the side lights of the trailer energize whenever I start the vehicle and connect the trailer harness, but only because I've connect those trailer side lights wire to that one constant dc power source in that connector. I'm not a newbie to electronics, dc lighting or mechanical. Being doing it for 40 years. Any body else notice this issue? Thanks John Interesting John. I just got to the bottom of my problem, which sounds like yours. (2017 Ridgeline RTS). My neighbor completely re-wired the livestock trailer and when we tested it yesterday, everything worked except the running lights (the lights that are on when the lights are on in the truck). We diagnosed the problem to be in the plug, since when we plugged the same wiring harness (7 to 4 also) into a different truck, all lights worked. My mechanic spent more than an hour this morning and finally fixed the problem. Two wires in the Honda plug (where I plug in my 7 to 4 wiring harness to the trailer), were apparently switched at the factory. He called Honda to get a new plug and was told that they are back-ordered. To fix the problem, he switched the 2 wires himself and now all the lights work, including the running lights (you could call them the tail lights, also). My guess is that my plug came defective from the factory in Alabama. Is that your guess also? My question is was there a recall on this problem? Was it all 2017 models? Thanks, Lee in Iowa

Scritto da: Brandon loco

Are your running lights not working on your Honda Ridgeline with the Curt wire harness?

Everything was pretty simple with the kit except the instructions are a little bit off. I have a 2017 Honda Ridgeline front wheel drive vehicle. I installed per the instructions and my running lights on the trailer wouldn't work. These are the changes that should happen IMO. 1.) It says to route the 4 way connector to the trunk but no way is that possible on this vehicle. With the black wire protector it fits great kinda pinched between the plastic on the bottom near the hitch, that way it can easily slip out or stay up when not in use. 2.) VERY IMPORTANT!!! The instructions say use fuse 3 and 6, the diagram has an arrow pointing to fuse 7 (WHY???). I had to use fuse 6 and the fuse that went into 3, I placed in spot 9 and that got my running lights working. I'm not sure what fuse 3 is for but in my circumstance it wasn't needed.

Scritto da: Amy

Very easy to install

The instructions were perfect and easy to follow. The lights worked great without any issues. I installed them on a 2009 Honda Pilot.

Scritto da: Jason

Easy trailer wiring kit

Directions are accurate and install took 20 minutes. Harness worked perfectly. Only gripe if at all is the lack of mounting bracket for the flat 4 plug. I would have paid more if it was included

Scritto da: Aisa

It did not work on my 2010 pilot

Installed it as directed, but it did not work. I then returned it and bought the tow ready T-one 118491 and it works.

Scritto da: Kenneth Laird

The product was eventually made to work, but information ...

The product was eventually made to work, but information I found in another user's review proved to be crucial in getting it to. I think the manufacturer should have known that for the product to work, fuses had to be already in place in certain locations in the engine bay fuse box. This is a very specific use case product, 2017 Honda Ridgelines and earlier model Pilots. Updates and notifications should have been all over their website about this since getting printed instructions updated is not feasible.

Scritto da: GK

Great Product, does what it needs...

Worked Great for 2010 Honda Pilot. Instructions and all was good. Product works as expected. thanks

Scritto da: Amazon Customer

2011 Honda pilot

Works great with my honda pilot. Easy to install with just a few tools.