CURT 56330 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib Select Dodge Journey koos LED-tagatuledega, must

Brand:CURT

3.6/5

84.64

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, et see sobiks teatud aastate jooksul Dodge Journey koos LED-tagatuledega (sõiduki ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Ühikuid pole saadaval
TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKISPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud LED-tagatuledega Dodge Journey valitud aastateks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.
Brand CURT
Brand ‎CURT
Country of Origin ‎Philippines
Customer Reviews 4.6 4.6 out of 5 stars 490 ratings 4.6 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56330
Item Weight 1.65 Pounds
Item Weight ‎1.65 pounds
Manufacturer ‎CURT
Manufacturer Part Number ‎56330
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56330
Product Dimensions ‎9 x 6 x 3 inches

3.6

13 Review
5 Star
78
4 Star
11
3 Star
5
2 Star
2
1 Star
4

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Amazon Customer
Just ad good and cheaper than the store's
Used this for my trailer hookup
Scritto da: John Paul Parreira
Worked great
I installed this on a 2015 Dodge Journey and it went together good. I did not have the short wire issue going to the passengers side that others had I had plenty of wire so I’m guessing they fixed that issue. Also used heat shrink connectors instead of the cheaper ones the kit came with. It’s all plug and play except for running the one power wire to a positive cable under the hood that goes to the battery. I went over the drivers side rear wheel well then followed the e-brake cable to the front then went to the center underneath the car and followed the brake lines up to my power source by the top drivers side wheel well. I used some Romex (house wires) as a fish wire. I also bought a cheap 4flat connector bracket from curt cut the one side off drilled 4 holes in it. I then drilled holes and cut a slot in the bottom side of the rear bumper and riveted it on. I put washers on the back side of the plastic bumper for the rivets that way they don’t just pull through the plastic. I attached some photos of that.
Scritto da: Chris
So heres the honest truth..
The short version : It does what it advertises and now i can plug lights into my 15 Journey. The longer version... Curt shit the bed on this one. This harness works if you have some savvy skills and arent a moron. There is one wire that runs from the driver sideover to the passenger side, its about 8-inches too short. This is easily fixed by splicing in a short jumper to get the length you need to plug in the connector to the light. Also... Whoever at CURT that decided it would be a good idea to use the absolute cheapest zip ties that they could find, i hope you stub your toe every morning on the bed frame. Again, easily fixed with just using other ties that i already had. So in conclusion, This harness will work if you do CURT's job for them and make it work. If youre the person installing it with your tool box that you keep in your wifes closet in the hallway, this probably isnt for you. If you have some sort of problem solving skills, it'll be just fine. My 6 yr old helped me with it and it was a great experience for her. not only did she learn how to work on a car, she also learned that sometimes what you buy isnt what you actually get. 4 Stars because it works, not 5 because of the issues above.
Scritto da: DuaneJ
Works as expected
I recommend watching the UHAUL install video. It is better than the CURT video. The product description states "this 4-pole trailer lighting wire harness comes with a rubber dust cover". I did not receive the dust cover. I contacted Curt customer service about the missing part several weeks ago, but I have not received a response yet.
Scritto da: IronAge101
Take your time
To start with I do wiring on machinery so this wasn’t as daunting as it could have been. I installed this on a 2018 Journey GT. Instructions were good, wire length was more than adequate, connectors went together smoothly, overall satisfied. I did use different mounting tape as well as self drilling screws. The butt splices included are a bit large for the wire, but if you strip the wire longer and fold it over it takes up the extra space. After splicing tape over the area with electric tape. I also used split convoluted tubing to cover the wires from abrasion and over all neater appearance. I ran the power wire behind the inner plastic fender well and then inside the channel under the doors (plastic trim).. up along the brake lines and to the battery terminal. I took my time and used plenty of tie wraps. Power on and everything checks out good.
Scritto da: Matthew Remington
Decent quality kit
Everything plugged in and worked just like it should. It looks like Curt got the hint about the short green wire in other reviews, because I had about 10" of EXTRA wire for that, as well as plenty of extra black power wire. The connectors do seem a little cheap, but everything is working well so far. It would have been nice for Curt to include a stiffer fish wire with the kit for easier install, but most handy folks have one already or can use a wire coathanger like I did. Overall, not bad.
Scritto da: Cody S
Not for beginner installation.
Like other have stated, this is not for first timers. If you are mechanically apt, this is a straight forward install. If you have trouble changing the time on your microwave or alarm clock, have someone else install this for you as it does take some understanding of how things work. That being said, I did not have the short wiring issue that other stated when going from the drivers side tail light to the passenger side tail light. In fact, I had extra wire. I ran the wire through the bumper reinforcement bar and it worked like a champ. It did take some time to get it fed through the bar. The rest was straight forward and reasonably easy to install.
Scritto da: chris
Very simple
Very simple no electrical knowledge really needed
Scritto da: Matt
Plug n play wiring harness does the job.
This wiring harness was straight forward to install. All connections are plug in connections at the rear tail light locations except for the one power wire which needs to be run to the front of the vehicle to connect to the positive terminal of the vehicle battery. The use of the supplied tie wraps, to secure the power wire to the undercarriage of the vehicle, ensures that the power wire will stay securely in place. Installation time was about 1.5 hours. The only negative comment I have about this wiring harness is that the green wiring connections that are feed from the drivers side tail light to the passenger side tail light should be about 6 inches longer to provide a little extra wiggle room for the attachment to the tail light connection. It was definitely a tight fit. Other than that one issue needing to be addressed by Curt Manufacturing I highly recommend this wiring harness.
Scritto da: Rodney fuller
Perfect
Nothing not to like this is my second time installing this product and very satisfied
Scritto da: julbert
Right fit and easy to install
Love it
Scritto da: Rob chateauneuf
installed as expected
easy to install
Scritto da: Mathieu Boucher
Excellent
Installation rapide, facile

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array