CURT 56056 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud GMC Acadia

Name: CURT 56056 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud GMC Acadia
Brand: CURT
SKU: 0612314560561
Price: 84.18 EUR
Availability: InStock

Brand:CURT

3.6/5

€
84.18

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, mis sobib GMC Acadia teatud aastate jaoks (sõiduki ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314560561

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. LIHTNE HAARDE. Selle sõiduki pistikupesa ergonoomilise disainiga on haagise juhtmestiku ja haagise tulede ühendamine lihtne. Selle üla- ja alaosas on sakid, mis tagavad parema haarde haagisega ühendamisel või vooluvõrgust lahti ühendamisel. SÕIDUKISPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud GMC Acadia valitud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 144 ratings 4.6 out of 5 stars
Exterior	‎Painted
Item Dimensions LxWxH	9 x 4 x 2 inches
Item model number	‎56056
Item Weight	0.55 Pounds
Item Weight	‎8.8 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56056
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56056
Product Dimensions	‎9 x 4 x 2 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Nicholas

Easy install in a 2007 GMC Acadia, exactly what I needed.

Bought this to quickly install trailer lights on a 2007 GMC Acadia. The install is relatively easy and straightforward. Hardest part is probably just fishing the wires down the sides of the vehicle to ensure they're out of the way but honestly it's just basic cable pulling. Use a coat hanger or a piece of wire helps a lot. Very economical vs installing a full electrical trailer kit if you only need the 4 flat connector like I did.

Scritto da: Eric C.

Nifty solution for adding trailer wiring without damaging your car's wiring harness!

Oddly enough, you purchase a GMC with a trailer hitch and plug-in for a trailer, then come to find out that GMC does not install the fuse box that actually connects the plug-in to anything. I was furious! Then I found this product. If you need to provide wiring for trailer lights and don't look forward to cutting into the wiring of your car, this harness is perfect. It does not require any cutting, but rather plugs in between the existing plug and plug in of each tail light lighting assembly (think of it like those Christmas light plugs that plug into each other and "stack.") This product solves the problem in a very neat way. While I never plan on removing it (even if I sell the vehicle), it could actually be completely removed and the wiring for the vehicle returned to pristine condition since you don't need to cut into any existing wires on the car. Thank you for saving my sanity!

Scritto da: rob

Great wiring harness!

Easy to install work perfectly

Scritto da: J. Scott

Wires are just the right length so that there is ...

Wires are just the right length so that there is not too much slack under the Acadia. A commenter says the wire ties are too short. That is true; however, I put two together, and I only needed to tie up in 3 places under the car. 2x3=6. I used my hitch bars as the tying points. Other commenters are right about one thing. It is very difficult to fish the wire up into the taillight wells. I used a fish tape and it still took a long time. But this product is designed perfectly / seems to work well.

Scritto da: Elizabeth

I like

The media could not be loaded. Este producto funciona muy bien 100% recomendado

Scritto da: Brandon

this setup is super easy and all I needed was a 7 millimeter ...

I have a 2009 GMC Acadia. and I have bought other T harnesses before but none of them seem to work. this setup is super easy and all I needed was a 7 millimeter wrench and a flat screwdriver within 45 minutes I had the trailer lights installed the directions we're a little bit hard to read but after youtubing it it was super easy to install! I would highly recommend the set up as long as you are not using electric brakes. the local dealership wanted 250 dollars and I picked this up for less than thirty dollars and 45 minutes of my time. highly highly highly recommend this product

Scritto da: wisc-man

a little pricey, but worked pretty well.

So first off, I was a bit put off by the price, but in lieu of a professional install it was extremely in expensive. The most difficult part was fishing the wire between the point where the rear signal light is and the bottom of the vehicle. Also, the zip ties were useless as there were just too small/short. I ended up using my own, after which everthing fit snugly. I confirmed the procedure was correct, but i would recommend checking out their Youtube video for performing the installation. It took about 20-30 minutes to complete and confirm functionality.

Scritto da: Hoot

Awesome

So easy to install and works great. Thank you!!!

Scritto da: Amazon Customer

Worked perfectly!

Installed this harness on my 2012 Acadia. Very simple installation, as per instructions. Rented a U-Haul trailer and the lights worked perfectly. Very happy!

Scritto da: Rudy

Fits good

A+++