BUD Industries CN-5704 survevalatud elektrooniline tarvik, kohandatud ekstrudeeritud tööstuslik struktuur 4,51 P x 2,5 L x 2,22 K, hall

Name: BUD Industries CN-5704 survevalatud elektrooniline tarvik, kohandatud ekstrudeeritud tööstuslik struktuur 4,51 P x 2,5 L x 2,22 K, hall
Brand: Bud
SKU: 6367949001531
Price: 45.50 EUR
Availability: InStock

Brand:Bud

3.7/5

€
45.50

BUD Industries CN-5704 survevalatud alumiiniumist korpus sobib suurepäraselt mõne teie kohustusliku elektroonikaprojekti jaoks. See elektrooniline valas on korraliku suuruse ja disainitud kattega. Suure vastupidavusega valu on valmistatud ADC-12 alumiiniumsulamist, muutes selle vastupidavaks kõikidele ilmastikutingimustele. Kasutatav isekleepuv EPDM-tihend kinnitatakse kergesti kaane külge. Mudelil on ka sisemised kaardijuhikud PC-plaatide paigaldamiseks või eraldamiseks. CN-5700 Die Cast'i parim osa on see, et see annab teile vabaduse hõlpsasti töödelda ja kohandada vastavalt teie vajadustele. Vajalike kinnituste tegemiseks võite ka augud puurida. Elektrooniline lisaseade kaalub 2,56 untsi, mis muudab selle üsna kaasaskantavaks. Karbi lühikesel küljel asuvad sissevalatud kinnitusäärikud annavad sellele tugeva haarde. Üldiselt kasutab see survevalatud korpus suurt hulka olulisi funktsioone, et rahuldada teie igapäevaseid elektroonikavajadusi.

Ühikuid pole saadaval

EAN: 6367949001531

Kategooriad Tööstus ja teadus, Tööriistad ja kodukaubad, Elektriseadmed, Elektrikarbid, Juhtmed ja liitmikud, Electrical Boxes,

Välised mõõdud 4-1/2 pikkust 2-1/2 laiust 2-7/32 kõrgust; sisemised mõõdud 4-3/8 pikkust 2-3/8 laiust 2-3/32 kõrgust. Looduslik viimistlus. 2,22 K x 4,51 P x 2,5 W. Isekleepuv EPDM tihend kinnitub kergesti kaane külge. Loodud vastama NEMA 1, 2, 4, 4x, 12, 13 ja IP66 reitingutele.

Brand	Bud
Color	Gray
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	5 x 2.5 x 2.2 inches
Item model number	CN-5704
Manufacturer	BUD Industries
Material	Aluminum
Product Dimensions	5 x 2.5 x 2.2 inches; 5.8 Ounces
Style	No Mounting Bracket

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: bobdesigns4262

awesome

i sell automotive fasteners and fittings. one of our services, we make harnesses, and electrical switching for the car/truck or industrial applications. I searched many different "boxes" to house relays, for custom applications. I was able to place the relay in the box, and have room for the wiring to stay in place and mount the relay almost perfect in the space. due to the type of castings, I wouldn't apply medium or higher pressure, so the box doesn't crack or collapse beating on it. slow drilling with a sharp bit, was all it took to make holes I needed. the best part, it didn't take much to do a simple polish on it. yeah, I could have sanded out the swirls in the casting, but I am trying to keep the price I am selling it for. I don't know about other applications, but I will tell you this wouldn't be a good box for pedals on it. the lid will cave-in under use. used in just protecting a device or switch, it will do great. I will be buying more

Scritto da: EF

Ok if you're looking for a box to put electronics inside

Its on as an electronics project box. Its higher quality than most project boxes. That's not saying much. Waterproof gasket takes some effort to install properly. The aluminum alloy is something I'm not familiar with. Its not your typical cold rolled 6061/6065 though I wish it was. Its more brittle and less impact resistant than the aforementioned alloys. Maybe 7000/8000 series or perhaps just a byproduct of the extrusion.

Scritto da: Jack M.

Met My Expectations

This enclosure is exactly what I was needed for an electronics construction project. Dimensions were accurate,

Scritto da: Number 6

Clean casting and tougher than its light weight implies

I used this to house a battery disconnect switch on an engine project that I have. I had to drill a number of holes in it to accommodate the cabling. I was happy to see how resilient the material was as I drilled and filed it to the shapes I needed.

Scritto da: Gary L. Berry

heavyduty

This turned out to be just what I needed. I used it to put 3 control buttons for my driveway gate. It will probably out last me. Very good product.

Scritto da: Robert M Ruiz

Very good.

It is super sturdy. Has a moisture gasket. Fairly easy to drill. A good product.

Scritto da: Circuit Hacker

An industry standard for hobbyists and professionals

These are cast aluminum enclosures for housing small electronic circuits -- pretty much an industry standard for hobbyists and professionals (I'm both) alike. The price was right and shipping was fast. Unlike a couple of electronics distributors, there was no massive shipping change to get these in two days (I have Amazon Prime). I ordered these to house a couple of impedance-matching baluns I'm building.

Scritto da: Christopher Bart

The best

BUD is the best. I think they are still American made. A fine product. The siddes are designed to slope in a bit, so order a bit large.