BOSTITCHi raamiv naelur, 33-kraadine paberiteip (F33PT)

Brand:BOSTITCH

3.4/5

444.66

TOOTE KIRJELDUS See 33-kraadine paberteibiga raamiv naelur on loodud naelte löömiseks tehissaematerjali sisse. BOSTITCHi raamiv naelur on kerge, et seda oleks lihtne hallata ja saate naela sügavust juhtida nupuga. Tõhususe tagamiseks kasutage seda 33-kraadist paberteibiga raamimisnaelutajat. AMAZON.COM Raamimine, vooderdamine, terrassid, metallühenduste paigaldamine, puidu kinnitamine müüritisele, suurte naelte löömine kõvasse konstrueeritud saematerjali – nimetage seda – see mitmekülgne ja kerge Bostitchi raamimine naelutaja teeb seda kõike. Kaks naelutajat ühes, see raamimispüstol sisaldab kahte kiiresti vahetatavat ninaotsakut, mis muudavad tööriista kas raamimiseks või metallkonnektoriteks. Tehases paigaldatud järjestikpäästik ja Bostitchi eksklusiivne nutikas päästik tagavad optimaalse juhtimise ja kiirema tootmise. Töötades nii löögi- kui ka järjestikuse tulerežiimis, tagab tööriista kerge magneesiumkorpus lihtsa käsitsemise ja ületamatu vastupidavuse. Vaid 7,9 naela kaaluv tööriist saab suurepäraselt hakkama kitsastes kohtades (nt pööningul) ja muidu õlgu põletavatel tööülesannetel. Uuenduslik disain on ka õnnistus, kui naelutatakse ülemised plaadid põranda ühenduskohtadesse või kui roomate selle madala teki alla, et tugevdada uut mullivanni. Patenteeritud surunupp ja sõidusügavuse juhtimine tähendab loomulikult seda, et kompressori rõhku ei saa reguleerida, aga ka seda, et te ei pea järsul katusel seistes tööriistu ega ebamugavaid lüliteid kobama. Seadke lihtsalt kompressor rõhule 80 psi ja reguleerige sügavust vastavalt vajadusele. Seade juhib 1-1/2-tollisi STRAPSHOT-kinnitusi ning kõiki 1-1/2- ja 3-1/2-tollisi metallkonnektori naelu, mille mõõtmed on 0,131 kuni 0,162 tolli läbimõõduga. Vahetatav ots aitab asetada naelad täpselt metallühenduste jaoks. Üks oma klassi võimsamaid raamijaid, see naelur pakub 1050 tolli/naela. võimsust. Vähemaks seisakuid ja suuremat tootlikkust, aitab salve sälguga 16-tolline paigutusindikaator saavutada õige naastude vahelise kauguse mõne sekundiga. Ja poltidega kinnitatavad terasest kulumiskaitsed koos integreeritud kummist libisemispatjadega kaitsevad tööriista põrutuste ja kukkumiste eest, tagades selle ületamatu vastupidavuse ja aastatepikkuse kasutuse. --Brian D. Olson Mis on BoxNailer, vahetatav otsik TOOTJALT BOSTITCH F33PT on 33-kraadine paberteibiga raamiv naelutaja, mis muutub vaid sekunditega metallkonnektoriks! See erakordne disain viib raami naelad pikkusega 2 tolli kuni 3–1/2 tolli (.113–.162). Tööriistal on vahetatav otsik metallist ühendusnaelte (1-1/2 kuni 2-1/2 tolli pikad) löömiseks täpselt riistvarasse, nagu orkaani sidemed ja talapuud. Saate kasu kahest tööriistast ühes, ükski teine ​​konkurentsivõimeline kaader ei suuda neid funktsioone võrrelda. F33PT-l on kerge magneesiumkorpus (kaalub ainult 7,9 naela) ja 1050 tolli/nael. suure jõuga, et tulla toime ka kõige raskemate ehitustöödega. Selle reguleeritav surunupu sügavusjuhik seab mugavalt soovitud sügavusele. Lisaks on F33PT-l ainulaadne 16-tolline paigutusindikaator, mis võimaldab saavutada õige naastude vahelise kauguse mõne sekundiga ilma mõõdulint katkestamata. Võite olla kindel, et see tööriist teeb seda kõike. Näe rohkem

Ühikuid pole saadaval
Kerge magneesiumsisain lisab vastupidavust. Sisaldab 2 kiirelt vahetatavat otsikut, et muuta tööriist kas raamimiseks või metallist konnektoriks. 1050-tolline naela sõidujõud raskete konstrueeritud saematerjalide jaoks. Metallühenduse võimalus sisaldab vahetatavat otsikut, mida saab kasutada talade riputitel, orkaanirihmadel jne. Käivitab 2–3–3–1/2-tollise paberteibiga raamitud naelad ja 1–1/2–3–1/2-tollise paberlinti metallist ühendusnaelad. Käivitab 1-1/2-tollised STRAPSHOT-kinnitused, samuti kõik muud 1-1/2-tollised ja 2-1/2-tollised metallist ühendusnaelad (131-162-tollise läbimõõduga). Reguleeritav sarikakonks võimaldab kasutajatel tööriista sarikatele ja taladele riputada. Kerge magneesium disain vastupidavuse tagamiseks. Raamiva naelutuspüstoli patenteeritud nupuga reguleeritav sügavusjuhik seab naelad soovitud sügavusele. Kaks naelutajat ühes: sisaldab kahte kiirelt vahetatavat otsikut, et muuta tööriist kas raamimiseks või metallist konnektoriks.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Multi
Customer Reviews 4.4 4.4 out of 5 stars 143 ratings 4.4 out of 5 stars
Included Components ‎PAPER COL FRAMING NA
Is Discontinued By Manufacturer ‎No
Item model number ‎F33PT
Item Package Quantity ‎1
Item Weight ‎1 pounds
Manufacturer ‎BOSTITCH
Material ‎Metal
Measurement System ‎Inch
Part Number ‎F33PT
Power Source ‎Air Powered
Product Dimensions ‎18.7 x 1 x 5.6 inches
Size ‎One Size

3.4

11 Review
5 Star
75
4 Star
11
3 Star
4
2 Star
2
1 Star
8

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Jeremy P. Holt
Worked perfect
Shot 600 3.5” deck nails right out of the box — not 1 jam or double feed — literally not one issue … the 33 degree nails seem to be hard to find at local stores though …but widely available inline.
Scritto da: EDN
Fantastic and powerful 2-in-1
Works as advertised. Bought this to build a large deck. Worked great with Hanger nails attachments and powerful for the 3-inch framing nails. If you're going to buy a mailer, this is the one to get. No need for two separate ones unless you're doing large volume and switching often. Even so, nail guides are easy and quick to change from framing to hanger nails. Did about 10000 nails and not a single jam.
Scritto da: fishfishy
Nice framing nail gun at a good price
I bought this nail gun for some framing work. Its powerful and drives framing nails nicely. I have a cheap no brand compressor that couldnt deliver an adequate flow rate for this gun (it resulted in nails that werent driven in properly). I removed the old regulator and installed a Jet 3/8" FRL. I use 3/8" air hose to connect the nail gun from the compressor. I adjusted the compressor so that the cut-in pressure is at 95 PSI and the FRL regulated at 95PSI. This resulted in predictable and consistent driving pressure- perfect nail depth each time. The nail depth adjustor is easy to use. This gun is at a good price and has saved me alot of time and work (compared with nailing framing using a hammer). Its handled some abuse and some knocks (all accidental of course) and nothing has fallen apart yet. The only negative thing I found is that the spikes lose their sharpness quickly. I use LOSP treated Oregon framing timber which has a slippery surface and the timber spikes occasionally dont grip very well when toenailing or nailing at an angle. This nail gun uses 34 degree D-shaped collated framing nails. This is the standard framing nail type we use in this side of the world. My readings on Amazon.com is that some building regulations require a round head framing nails- you'll probably need a 21 degree collated nail if that is the case. Happy nailing.
Scritto da: Nathan Hertel
Pays for itself in a day
I do a lot of renovations, but not that much heavy framing, so I didn't even know they had a framing nailer for metal connectors and I've been doing things the long way. After a whole house worth of hurricane ties and a large deck of joist hangers, this was a rockstar purchase. I've probably put at least 2000 nails through it with no holes missed. I like the paper tape 33° option of this gun so I don't have to refill clips as often. The nailer is on the heavy side and isn't as well balanced as other tools, but everything feels well-built, I had no jams, and it does exactly what it was supposed to exceptionally well. You can change out the precision point pressure trigger for a traditional framing trigger with the push of one button, excellent design. **** Other reviewers have noted they can't find 33° nails at any stores, I've had no problem with 30° Paslode nails which are in stock at my Home Depot and Lowe's. I've gone through almost a whole 2000 nail box of 2 3/8 inch nails and can't recall a single jam.
Scritto da: J. Treg
Would Not Feed Framing Nails - Returned - Updated
I really, really, really wanted this nail gun because of its framing AND strap-hanger abilities. I may change this rating if the replacement F33PT works as described. The first one would fire a framing nail, then fire blanks. If you racked [pull back and release] the loader, it would fire a nail . . . then blanks. If you racked it each time before firing, it would fire a nail. I tried Simpsons (33-degree), Paslode (30-degre), and Bostitch (33-degree). When unloading the nails, the stick would not slide back with just thumb pressure, as they do in other nail guns. I had to insert a nail in between nails in the stick and pull them back - yes, holding the nail release - to get them loose. I believe something is jamming the nails at the feeding point. I am now finding that 33-degree nails are really difficult to find! They are also expensive. One reason I chose this nail gun is because others' reviews said it fired Paslodes 30-degree framing nails quite well. Since this gun didn't fire any framing nail well, I will reserve commenting on that until I get the replacement gun. I owned this gun three days, and fired 25 nails through it. The strap hanger tip is great for precise placement. UPDATE: Amazon is wonderful in its return and turn-around time. That said - The new one still will not continuously fire other framing nails by other manufacturers. Bostitch nails are EXPENSIVE and hard to come by. Thank God this isn't a requirement, but a nice to have with my projects. Whoever said it would fire Paslodes it totally incorrect in my experience. Do not buy this nail gun - the recurring cost of nails will be very, very expensive. Update #2: this nail gun is unsupportable for framing. I have tried to find Bostitch brand framing nails, and they cannot be found. What good is a nail gun if you cannot buy nails it will fire? Every place I tried, including Amazon, says, "Nails are back-ordered and we have no idea when they will come in. I wish I could rate this a negative number.
Scritto da: M. J. Ince
Powerful, Versatile, Flawless Function
I am totally satisfied and happy with this purchase of the Bostitch F33PT nailer. It is powerful and fairly lightweight. It comes with two barrel attachments, one with a point that finds the hole in metal hangers used for joists, and the other for general framing. It's quick and easy easy to change over from one to the other; just press one button and the attachment slides out and slide the other one in. I'm using galvanized nails 2.5" x .161 diameter for hangers, and 3.25" x .131 diameter for framing. A nail guidance dowel must be moved from one hole to another for these two sizes but it is quick and painless. I framed a great room sub-floor using metal hangers and this nailer worked perfectly. Saved a lot of time. I ordered the 33-degree paper tape nails from Amazon and they worked great. Nailer comes with two triggers, but I haven't tried the "contact trip" yet which shoots on contact. I've only had this a few weeks but I like it a lot! UPDATE 2/8/19: Still working great! Best tool investment I made!
Scritto da: john cansdale
Ideal first fix nailer
Heavy nail gun but is first rate for my busy construction life and no need for gas cylinders that can go out of date if not used, just hook it up to my compressor and away I go!
Scritto da: Peter S.
Great precision point nail gun
This nail gun comes with 2 tips - one for framing (which has an adjustable depth guage) and one for precision nailing. The precision tip is 100% accurate. Works great for nailing strapping and joist hangars.
Scritto da: In2Trux
Cost savings having two nail guns in one. A framing gun + joist hanger gun
Works great. Very commercial grade. Feels heavy duty. Convenient and quick reload. Somewhat inconvenient switching interchangeable tip and trigger for use on joist hangers, hurricane straps, but having both in one nail gun is definitely a cost savings.
Scritto da: Matthew
Reliable, good quality.
Good quality framing gun. Had this gun for awhile and have had no issues. Shoots nails in LVL beams with ease. Only issue I have is the nail holder that pushes the nails up, pushes the nails out of the slide from time to time. Which can get a little annoying.
Scritto da: JSH
Leaking
Leaking after 5 uses.

Seotud tooted

hot
Metabo HPT metallist konnektori naelur
3.8/5

€ 465.25

Metabo HPT metallist konnektori naelur
3.8/5

€ 465.25

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array