Bosch GTL3 65 jalga nelinurkne lasertase plaatide ja ruudukujulise paigutuse jaoks, sinine

Name: Bosch GTL3 65 jalga nelinurkne lasertase plaatide ja ruudukujulise paigutuse jaoks, sinine
Brand: BOSCH
SKU: 733353828211
Price: 234.79 EUR
Availability: InStock

Brand:BOSCH

3.5/5

€
234.79

TOOTE KIRJELDUS Boschi metallipuurite sari pakub lahendust igaks professionaalseks rakenduseks. Iga otsik on valmistatud täpsete spetsifikatsioonide järgi ja sellel on poolituspunkt, mis algab kokkupuutel kõndimise või uisutamise puudumisel, välistades vajaduse keskpunkti järele. Boschi mustad oksiidotsad pakuvad suurepärast vastupidavust, kiirust ja valikut enamiku üldotstarbeliste rakenduste jaoks. See toode on 2. klassi lasertoode, väljundvõimsus 1 Mw, lainepikkus 635 Nm. TOOTJALT Seina- ja põrandakatte laser.

Summa

Lisa ostukorvi Osta kohe

EAN: 733353828211

Kategooriad Tööriistad ja kodukaubad,

Vastupidav: see tugeva paigutusega laser, mis talub raskeid töötingimusi; Vastupidav tööriist on koos pehme kandekotiga. Nähtavus: heledad, teravad, hästi nähtavad laserijooned, mis tõusevad pinnalt, et projitseerida ebatasastest pindadest või takistustest ning liikuda neist mööda; Eksklusiivne lülitatav 45° joon aitab kontrollida ruudukujuliste plaatide õiget asetust 0° ja 90° vahel. Täpsus: projitseerib täpselt 90° jooned plaatide, põrandakatete paigutuse ja seinte jaoks. Sellel Laser Square'il on jooned, mis asetsevad laseri aluse ette, et hõlbustada punktide tsentreerimist ja täpset reguleerimist. See toode on 2. klassi lasertoode, < 1 Mw väljundvõimsus, lainepikkus 635 Nm.

Batteries	‎4 AA batteries required.
Batteries Included?	‎Yes
Batteries Required?	‎Yes
Battery Cell Type	‎Alkaline
Brand	BOSCH
Brand	‎BOSCH
Color	Blue
Color	‎Blue
Customer Reviews	4.5 4.5 out of 5 stars 957 ratings 4.5 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6.13 x 4 x 3.88 inches
Item Dimensions LxWxH	‎6.13 x 4 x 3.88 inches
Item model number	‎GTL3
Item Package Quantity	‎1
Item Weight	‎0.9 Pounds
Item Weight	‎14.4 ounces
Manufacturer	‎Bosch
Material	Plastic
Material	‎Plastic
Operation Mode	‎Automatic
Part Number	‎GTL3
Power Source	‎Battery Powered
Product Dimensions	‎6.13 x 4 x 3.88 inches
Size	‎0
Style	Tile laser
Style	‎Tile laser
Warranty Description	‎1 yr warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: NurseTiffany

Tile Work Made Easy: How This Tool Helped Me Align Everything

This tool has been an absolute lifesaver for me, as a DIY enthusiast with limited tile work experience, who was looking for an alternative to replacing the carpet in my basement. It helped me maintain proper alignment throughout the entire process, and I highly recommend it to others looking to take on similar projects. Although it may be a bit pricey, it has already proven its durability, as it kept aligned and bright even after I accidentally dropped my saw horse table on it.

Scritto da: Riley Mark Taylor

Easy to use

It is easy to use, but I am unhappy with the brightness of the laser, for the price it could be better.

Scritto da: Anniel Molenillo

Poco brillo

Muy buena la herramienta, pero las líneas no se ven muy bien cuando hay mucha claridad

Scritto da: Sebastian Rodriguez

Excelente equipo

Funciona muy bien, es pmuy practico para las construcciones. La base magnetica es muy util para construcciones con panel.

Scritto da: thickwaistedman

Works well, but you need a stand

This works as good as I could have expected. A set of stilts or maybe some kind of lifter would have been marvelous. I'm sure if you're using regular spacers and not those wedges and spinners, you won't need any adjustment to the height, but with the spinners and the wedges, you'll need a box or something to set it on to get over the big blocks that those levelers create. What makes this still a5 start product is twofold. 1. It's been around since before those gigantic spinners and levelers. 2. It shoots a plane of light instead of just a beam, so, if you raise it up, like setting it on a box or bucket, it'll still shine a line where you need it to.

Scritto da: Chris

Huge time saver

I finally broke down and go this for the tile job in my house. With almost 2,500 square feet of tile to lay, this looked to be the easy way to get my lines straight. It's pretty much pop the batteries in and push the button. First use was to layout the tile down a hall that had about 1/4 total clearance with full tile widths on the width, and this made it a breeze. I've used string lines and chalk lines, string gets in the way and does not stay tight or straight when you start hitting it and chalk lines get covered up. I was shooting down over 30' with clear laser lines on the floor all the way, made setting tile a breeze, especially since I am using rapid-set thin-set for the first run (isle that I need to walk on before tomorrow). If I was using any other method, I'd be stuck mixing small batches and setting 2-3 tiles at a time, I could run with full buckets with this. Only issue I ran into is very minor, the time-out is a little on the short side, I think it's about 45 minutes and it shuts off. I like that as it will save on the batteries, but unless you reset it after every bucket of thin-set, it will shut off on you. I have also used this for laying out for framing walls and it works really well for that too. I almost forgot I had it when I was laying out 3 rooms and this made life a lot easier. This will pretty much made any straight line/45/90 degree layout job easy, whether it be tile, framing or whatever else you are doing.

Scritto da: Handyman

Handy

I bought this for a bathroom floor tile installation. It did not help me much on the walls. Laying out the wall tile I used my levels. It does have a really nice plate for mounting it to the wall. For larger rooms it would probably be more useful or if I was putting the tiles in at an angle. For the shower I was doing not so much. For laying out floor tile this laser is really nice. Most walls are not perfectly square. This laser will save some time in that you can move it around until you get what you want. It is a lot easier to move around than a big lay out square or drywall square. You can measure of one wall and snap a line. That is what I used to do. The problem is when the walls are not square and your trying to fudge a little here and a little there. The diagonal line is also nice. It was very handy and It helped me set up my floor plan. A friend used it for tiling a laundry room and has ordered his own after using mine. I only gave it four stars because I thought the line was a little light. I expected a brighter light. The line shoots down and creates a nice square right in front of the laser. I am happy with the product and look forward to using it again on my next project.

Scritto da: R. Busch

Great indoors. Worthless out of doors.

This laser is simple to use and it works well indoors. It was useless for me outdoors, even on a completely cloudy day. There was no point in trying it outdoors on a sunny day. I did try it outdoors after dark and it worked well. I wish I had it years ago for tile work indoors. I REALLY like the way this unit is designed. It can be backed into a corner of a room so that it rests against both walls. I had an earlier version of this general type of right angle laser, and the back of it was rounded. From a top down view, it looked like a piece of pie or wedge of cheese. It could not be registered against anything. I really disliked that design. The Bosch design is much better. I also like the way this Bosch laser tool projects the lines a short distance up the walls. This allows me to put registration marks on the wall. Marks on the floor will eventually be covered up by the floor covering. Marks on the wall won't suffer that fate. I would recommend this tool.

Scritto da: BarryK

Functional, but not suited well for my application

I purchased this item to assist in the tiling of a 60"x60"x60" shower alcove with a couple of built in shelf/pockets. I found that I could not find a good position to mount this laser so ended up using the tried and proven spirit level technique. I am not a professional tiler so I may have missed something in the set up. I think it would be perfect for laying floor tiles in large area applications.

Scritto da: Fat Rabbit

Strong laser lines, good heft, accurate

I gotta give this thing props, it does a nice job at squaring a room quickly and accurately. The raised position of the lasers helps the beam skip over uneven terrain like tile to surface, over floor drains and obstructions about an inch tall so your pencil or next piece of tile won't interrupt your beam. It's a winner in my books, been laying tiles for 16 years and my father has been at it over 50 and even he see's the value in this tool, his words were "I wish we had things like this when I was young..." saves a lot of time on the job.

Scritto da: Justin Castonguay

Dissapointed

Laser not very strong. Bought to do ceramic tile and ended up having to use a chaulk line. Disappointed. Deff not worth the price

Scritto da: Amazon Customer

Très pratique !

Fonctionne à merveille , très efficace, la base aimanté est un atouts intéressant avec la plaque métallique. Très utiles pour définir les espaces lorsqu'ont analyse les grandeur de pièces à créé cela donne un aperçue rapide et réaliste. Fonctionne bien pour le carrelage, crée des alignement rapide et avec moins de traçage, et comme les ligne remonte légèrement sur les murs cela aide à tracer les enlignement murs/plancher aussi. Rien de négatif à dire pour le moment.

Scritto da: Boki23

Great laser for flooring

I bought this laser to lay tiles. It's perfect for floor but not for wall. I would definitely recommend but only for floorings.