Attwood SP-15900 kallutatav-N-libistatav istme kinnituskomplekt, pingi tüüpi istmeplaat 15-tollistel siinidel, tugev ja vastupidav alumiiniumkonstruktsioon

Name: Attwood SP-15900 kallutatav-N-libistatav istme kinnituskomplekt, pingi tüüpi istmeplaat 15-tollistel siinidel, tugev ja vastupidav alumiiniumkonstruktsioon
Brand: attwood
SKU: 0014599159001
Price: 102.35 EUR
Availability: InStock

Brand:attwood

3.5/5

€
102.35

See Attwood Tilt-N-Slide istmekinnituskomplekt on mitmekülgne istmekinnitus, mis suurendab paadi mugavust, mitmekülgsust ja kasutatavust. See pingi tüüpi istmekinnitus sobib ideaalselt tööpaatide istmete paigaldamiseks. See koosneb 15-tollistel siinidel olevast istmeplaadist, mis võimaldab paadisõitjal istuda, kuid vajadusel liikuda, et pääseda juurde juhtnuppudele, seadmetele ja paljule muule. Sellel istmekinnitusel on tugev, vastupidav ja kvaliteetne alumiiniumkonstruktsioon ning see paigaldatakse kindlalt, et tagada töökindlus. Attwood Corporation on olnud kõrgeima kvaliteediga meretoodete projekteerimise, katsetamise ja tootmise auhindu võitnud liider üle 100 aasta. Pakume ohutut ja usaldusväärset valgustust, kütusesüsteeme, veesüsteeme, istmeid ja postamente, ujumisredeleid, kohandatud polstrit ja üldisi meretarvikuid, mida on lihtne paigaldada ja mis vastavad eeskirjadele.

Summa

Lisa ostukorvi Osta kohe

EAN: 0014599159001

Kategooriad Sport ja vabaõhu, Sport ja fitness, Purjetamine ja purjetamine, Paadid ja varustus, Veesõiduki kabiinitooted, Seating Accessories,

Paigaldatakse kindlalt, et tagada töökindlus. Kvaliteetne alumiiniumkonstruktsioon. Võimaldab paadisõitjal istuda, kuid vajadusel liikuda, et pääseda juurde juhtnuppudele, seadmetele ja paljule muule. Koosneb istmeplaadist 15-tollistel siinidel. Pingikujuline istmekinnitus sobib ideaalselt tööpaatide istmete paigaldamiseks. Mitmekülgne libistatav istmekinnitus suurendab paadi mugavust, mitmekülgsust ja kasutatavust.

Brand	Attwood
Brand	‎Attwood
Brand Name	‎Attwood
Color	Black
Color	‎Black
Customer Reviews	4.5 4.5 out of 5 stars 210 ratings 4.5 out of 5 stars
Included Components	‎End Product & Information
Item Dimensions LxWxH	‎16 x 7.75 x 3 inches
Item Package Dimensions L x W x H	‎15.63 x 8.19 x 4.13 inches
Item Weight	‎2.4 Pounds
Manufacturer	‎Attwood
Material	Other
Material	‎Other
Model Name	‎Attwood Boat Seating Accessories
Number of Items	‎3
Package Weight	‎1.32 Kilograms
Part Number	‎SP-15900
Seat Width	15 Inches
Seat Width	‎15 Inches
Size	‎15 Inch
Style	‎Bench Style Seat Plate and Rails
Suggested Users	‎Unisex-adult
Vehicle Service Type	Boat
Vehicle Service Type	‎Boat

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: J

Good product

Scritto da: Scott B

Best bang for the buck item I've added to my jon boat!

Easy and self explanatory to install, and now I can slide my seat to the side to run the motor, put it back to center for balance, and remove it if needed. Nowhere near as flimsy as expected once installed. The phillips screw heads in the hardware kit strip pretty easy so be careful there, and I did have to stick a washer under one side of one rail to allow the seat to slide- if your existing bench isn't perfectly flat you may have to do this. 15" rails allow more adjustment than I expected. Just ordered the 30" rail and bracket to install on the center bench. Strange they dont offer the 30" setup in kit form. Overall couldnt be happier, especially for the price!

Scritto da: Brackish

Adapted to my unique situation

I built a skiff but it was awkward to operate using a folding sport seat sitting loosely on the rear deck. I also needed to get my weight forward just a bit for trim and to be able to use a seat slightly off center at times and centered at times. Also needed to be able to move it so I can get into the large rear hatch. So I built a bracket to add to the rear deck cantilevered out about seven inches and the slide mount along with the seat, swivel, and tiller extension accomplished all the above. One star off for very bad hardware, for info if you use the supplied 3/4" long screws to attach to the swivel they are too long will interfere with the screws that hold the swivel to the seat all Attwood products. I didn't use the rear extrusion no room, but if testing indicates a need I'll put a short piece of aluminum angle over the rear slide bump to hold it down.

Scritto da: Amazon Customer

Good product

Overall works great. The screws strip too easy though.

Scritto da: Bill P

Quality product, but it could be better

It's a good product, but it will scar the seat of an aluminum jon boat if you don't make a slight alteration. I put the back part of the mount on top of a two-inch by one-eighth inch piece of aluminum so that part the swivel is attached to would slide on the aluminum piece and not on my jon boat seat. It's worth doing if you don't want to scar the seat. If Atwood would supply the extra piece, it would be perfect. The mount is strong and installation is fairly simple.

Scritto da: Ez-E

Good price

Good sturdy product. Little of a pain to install due instruction are not clear. Not quite as long as I thought. But it works.

Scritto da: John McLouth

Seat mount works well!

This mount solved a lot of problems! It was easy to install and holds up well! Definitely would recommend to anyone who needs to mount a boat seat! I mounted a 7” pedestal and swivel...love it!

Scritto da: Amazon Customer

Fast shipping

Product as described, fast shipping to Canada before estimated date. Only installed the base acouple weeks ago,works perfect for my application. Time will tell on durability,seems fine though.

Scritto da: Tyler

Works Perfectly After Some Modification

The media could not be loaded. These mounts work really well however since my old aluminum bench seats have a rounded edge the brackets were too small. I used some large 2”x4” L brackets to create a large enough mount to clear the round edge. If you aren’t handy I wouldn’t recommend. If you are they work great. I also opted to not use the rear part of the mount and instead just put a piece of stick on foam on the bottom of the rear bracket to protect the boat.

Scritto da: Amazon Customer

Back part not needed. Worked on one but not second seat for some reason. Just leave it off and it will be fine.

Scritto da: Amazon Customer

Very sturdy

Super easy to install